Description
The modern chainsaw file is usually made of carbon steel by rolling, forging, annealing, grinding, cutting teeth and quenching. It is called super hard chainsaw file. The super hard chainsaw file is made of T12 steel, and its hardness is HRC 62 ~ HRC 64after surface quenching.Generally, the principle of selecting super hard chainsaw file is: 1. The shape of the super hard chainsaw file is determined according to the shape of the workpiece to be processed; 2. The specification of the super hard sharpener is determined according to the size of the processing surface and the machining allowance; 3. The thickness of the super hard sharpener is determined according to the machining allowance, dimensional accuracy, surface roughness and material of the workpiece. For the workpiece with large machining allowance, low machining accuracy and large surface roughness, coarsesuper hard sharpener is selected. Fine tooth super hard sharpener is selected for workpieces with small machining allowance, high machining accuracy and small surface roughness. If the material is soft to use, choose coarse super hard sharpener, otherwise choose fine super hard sharpener.How to use super hard sharpener? We should pay attention to the correct use of super hard chainsaw file. The chain is easy to wear and needs regular maintenance. When filing the chain of chainsaw, it is better to fix the chain first. The chain of chainsaw can be directly placed on the guide plate of chainsaw, and then pull the super hard sharpener backward along the cutting edge (one-way). Generally, the chain maintenance of chainsaw can be completed in about ten minutes. In order to make the use of super hard sharpener more convenient, it is better to use it with super hard sharpener handle. Generally, the tail of super hard sharpener is round type, and there are also sharp and square type.
You can buy corresponding super hard sharpener handle.In order to prolong the service life of super hard sharpeners, the following rules must be observed: 1. New super hard sharpeners are not allowed to file hard metals; 2. super hard sharpeners are not allowed to file quenched materials; 3. Forgings and castings with hard skin or bonded sand must be ground off in the grinder before they can be filed with semi sharp files; 4. New super hard sharpeners are used on one side first, and then on the other side when the surface is blunt; 5 . when filing, always use a wire brush to remove the scraps on the super hard sharpener teeth. 6. The super hard sharpener cannot be overlapped or stacked together with other tools. 7. The super hard sharpener should not be used too fast, or it is easy to wear too early. 8. The super hard sharpener should not be stained with water, oil or other dirt. 9. The fine super hard sharpener is not allowed to file soft metal. 10. The mixed super hard sharpener should not be used with too much force to avoid breaking.super hard sharpener can play its best role under proper use and attentive maintenance.The effect and quality of XLIW super hard sharpener are obvious to all of us to see. As long as you take a sample and try it, you will be conquered by its quality.XLIW super hard sharpener is the best choice for loggers.XLIW super hard sharpener is not only easy to use, simple to operate, but also any model required by loggers, which saves loggers a lot of trouble.
